|
|
 |
|
Intec Polymers
Intec Polymers develops and produces Specialty Chemicals for global sales. It is a Research and Development oriented division with strengths in the technology of Polymers, Catalyst, Electrical Insulation and Surface Coatings.
|
Intec Polymers - Organic Titanate
Intec Polymers develops and produces Specialty Chemicals for global sales. It is a Research and Development oriented division with strengths in the technology of Polymers, Catalyst, Electrical Insulation and Surface Coatings.
| Organic Titanates are used for various applications like : - |
| - |
Enhancing the effects of adhesives, printing inks and various coatings. |
| - |
Catalysts for esterification, transesterification and Olefin polymerisation reaction. |
| - |
Increasing scratch resistance of glass by reducing fragility. |
| - |
Improving adhesion and conductivity properties of electronics and reduces metal oxidation. |
| - |
Improving film properties of wire enamels and coatings. |
| |
Products |
Usage |
|
INSOCAT BTM
Tera N- Butyl Titanate
|
It is widely used as a catalyst for reactions such as Esterification, Trans - Esterification and Olefin Polymerisation. It is recommended as a cross linking agent for wire enamels, surface coatings and printing inks. It is also used as a surface modifier, adhesion promoter, wax and oil additives and in manufacture of scratch resistant glass. |
|
INSOCAT IPTM
Tetra Iso-Propyl Titanate |
It widely used as a catalyst for reactions such as Esterification , Trans - Esterification and Olefin Polymerisation. It is recommended as a cross linking agent for wire enamels, surface coatings and printing inks. It is also used as a surface modifier, adhesion promoter, wax and oil additives and in manufacture of scratch resistant glass. |
|
INSOCAT BIPT
Tetra N-Butyl Iso-Propyl
Titanate
|
It widely used as a catalyst for reactions such as Esterification , Trans - Esterification and Olefin Polymerisation. It is recommended as a cross linking agent for wire enamels, surface coatings and printing inks. It is also used as a surface modifier, adhesion promoter, wax and oil additives and in manufacture of scratch resistant glass. |
|
|
|
Intec Polymers - Poly Isocyanate
Poly Isocyanate is recommended for preparation of solderable wire enamels conforming to Thermal class 155 ° C. This resin can also be used in combination with special polyester for making insulating varnishes for fiberglass sleeves and fiberglass covered cables.
| |
Products |
Usage |
|
INSOTHANE AP
Blocked PolyIsocyanate
|
It is recommended for preparation of solderable wire enamels conforming to Thermal Class 155 °C. This resin can also be used in combination with special polymers for making insulating varnishes for fiberglass sleeves and cloth and fiberglass covered cables. |
|
INSOTHANE CT
Blocked PolyIsocyanate
|
It is recommended for preparation of solderable wire enamels conforming to Thermal Class 155 °C. This resin can also be used in combination with special polymers for making insulating varnishes for fiberglass sleeves and cloth and fiberglass covered cables. |
|
|
|
Intec Polymers - Polyvinyl Formal
Polyvinyl Formal - is a chief ingredient in PVA based Wire Enamels, which have excellent resistance to transformer oil. These enamels provide outstanding toughness, flexibility and abrasion resistance. It also finds usage in adhesives and surface coatings in Combination with other resins. This material is available in four grades having different molecular weights and different viscosities to suit various end usages.
| |
Products |
Usage |
|
INSOFORM
Polyvinyl Formal
|
The most important use of Insoform is as a main ingredient in PVA based wire enamels which have excellent resistance to transformer oil. These enamels provide outstanding toughness, flexibility and abrasion resistance. it also finds usage in adhesives and surface coatings in combination with other resins. |
|
|
|
Intec Polymers - Wire Enamels
Wire Enamels - We manufacture Polyester, Polyesterimide, PVA, Polyurethane and Theic Modified Polyesters type having range to temperature class 130°L, 155°, 180° & 200°. Our products have found ready acceptance in reputed manufacturers of super enamelled wires.
Application Notes
| |
Products |
Usage |
Distinctive Properties of Wire Enamel |
|
SUPERCUT F
Thermal Class 130L
|
The wires processed with this enamel are recommended for heavy duty hand tools and high speed household applications such as mixes, driers, fans etc. |
This enamel is ideal for medium to superfine wires from 1.0 mm to 0.05 mm. |
|
SUPERSHOCK M
Thermal Class 130L |
This enamel has a very broad curing range which enables the production of both reddish brown to reddish golden coloured wires with high shine and gloss. |
This enamel is ideal for application on very thick to very fine wires from 5.0 mm to 0.1 mm. |
|
SUPERSHOCK M 9
Thermal Class 130L
|
This enamel with high solids has a very broad curing range which enables the production of both reddish brown to reddish golden coloured wires with high shine and gloss. |
This enamel is ideal for application on very thick to very fine wires from 5.0 mm to 0.1 mm. |
|
SUPERSHOCK M C
Thermal Class 130L |
This enamel has a very broad curing range which enables the production of both dark reddish brown to reddish golden coloured wires with high shine and gloss. |
This enamel is ideal for application on very thick to very fine wires from 5.0 mm to 0.1 mm. |
|
SUPERSHOCK M C 9
Thermal Class 130L |
This enamel with high solids has a very broad curing range which enables the production of both dark reddish brown to reddish golden coloured wires with high shine and gloss. |
This enamel is ideal for application on very thick to very fine wires from 5.0 mm to 0.1 mm. |
|
SUPERSHOCK 2
Thermal Class 155 |
Wires processed with these enamel have an attractive reddish brown colour in addition to balanced mechanical, thermal, electrical and chemical properties. These wires pass the type 2 requirement with a margin. |
This enamel is recommended for thick to fine wires from 2.0 mm to 1 mm. |
|
SUPERSHOCK S
Thermal Class 155 |
This enamel film is characterised by excellent heatshock, high flexibility and high abrasion resistance. |
This enamel is ideal for application on rectangular wires. |
|
SUPERSHOCK F
Thermal Class 155 |
Wires processed with these enamel have an attractive reddish brown colour in addition to balanced mechanical, thermal, electrical and chemical properties. |
This enamel is recommended for thick to fine wires from 2.0 mm to 1 mm. |
|
HIGHSOL M
Thermal Class 155 |
The wire processed with this enamel have good flexibility, cut through properties and excellent solderability. |
This Polyurethane based enamel is suitable for processing thick to fine wires from 3.0 mm to 0.1 mm. |
|
HIGHSOL F
Thermal Class 155 |
The wire processed with this enamel have good flexibility, cut through properties and excellent solderability. |
This Polyurethane based enamel is suitable for processing thick to fine wires from 3.0 mm to 0.1 mm. |
|
HIGHSOL H
Thermal Class 180 |
The wire processed with this enamel have good flexibility, cut through properties and excellent solderability. |
This Polyurethane based enamel is suitable for processing thick to fine wires from 3.0 mm to 0.1 mm. |
|
HIGHSOL H C
Thermal Class 180 |
The wire processed with this enamel have good flexibility, cut through properties and excellent solderability. |
This Polyurethane based enamel is suitable for processing thick to fine wires from 3.0 mm to 0.1 mm. |
|
|
|
Intec Polymers - Insulating Varnish
Insulating Varnish - We manufacture Air Drying and Baking type having range to temperature class 120°, 155° and 180°. In addition, we also offer a range of Solventless Varnishes to suit specific applications.
| |
Products |
Usage |
|
MONVAR FAST 40 C
Fast drying Varnish
Thermal Class 120X
|
This varnish is recommended for impregnation of coils, motors, transformers, etc. Its fast drying property makes it an ideal varnish for rewinders. It is a general purpose varnish which can also be used for the application on printed circuit boards, laminated sheets, etc. |
|
MONVAR FAST 50
Fast Air drying Varnish
Thermal Class 130X | This varnish is recommended for impregnation of coils, motors, transformers and other stationary windings. It is ideally suited for the impregnation of fan stators and field windings of FHP motors which need short curing time of 3 to 4 hours at 100° C. It is also suitable for laminate coating and inside coating of transformers. Its outstanding moisture and chemical resistance makes it suitable for industrial usage. |
|
MONVAR B211 C
Baking Insulating Varnish
Thermal Class 130R
|
This varnish is ideal for the high speed rotating machine operating at temperature upto 130 ° C. It is also suitable for fans, motors, transformers, magnetic relay coils, etc. |
|
MONVAR F402 C
Baking Insulating Varnish
Thermal Class 155R
|
This varnish is ideal for electrical equipment such as motors and transformers which are designed to operate at temperatures upto 155 ° C. It is also recommended for equipments which are subjected to stresses such as frequent on off cycles, high initial torques and nuclear radiation. |
|
MONVAR G301
Flexible Sleeve Varnish
Thermal Class 155X
|
The film formed by Monvar G301 on fiberglass has excellent mechanical and electrical properties with good resistance to humidity and hence it is used for varnishing fiberglass sleeves, cloth and tapes with Thermal Class 155. This varnish can also be used in combination with Monvar G302 for fiberglass covered conductors with or without an underlayer of polyester film. |
|
MONVAR G302
Flexible Insulating Varnish
Thermal Class 155X
|
- For the impregnation of Class F motors and transformers with high light coloured appearance.
- For coating fiberglass covered conductors in combination with Monvar G301 varnish. |
|
MONVAR H501
Baking Insulating Varnish
Thermal Class 180X
|
It is ideal for the impregnation of traction motors. It is also suitable for the magnetic coils wound with Polyester, Polyesterimide, fibre glass covered conductors for elevated temperature applications upto 180 °C. It is also recommended for hermetic machines. |
|
MONVAR H502
Flexible Insulating Varnish
Thermal Class 180X
|
It is mainly used as a binder varnish in the manufacture of glass covered round and rectangular conductors, with curing conditions similar to epoxy and polyurethane systems. |
|
MONVAR G303
Baking Insulating Varnish
Thermal Class 155R
|
It is recommended for the impregnation of hermetic motors. Due to its light colour, It also finds use in the transformers, coils to be fitted on electrical control panel. |
|
SLV 41
Solventless Varnish
Thermal Class 155X
|
It is suitable for motors upto frame size IEC 355, D. C. machines and alternators. It can be used by both dip and VPI methods of application. |
|
SLV 51
Solventless Varnish
Thermal Class 180X
|
It is suitable for motors upto frame size IEC 355, D. C. machines and alternators. It can be used by both dip and VPI methods of application |
|
SLV 7X
Solventless Trickle Varnish
Thermal Class 155R
|
It has good bond strength at elevated temperature and hence it is ideal for grinders and heavy duty machine tools and high speed machines. Due to slightly higher viscosity it can be used for electrical motors of frame size from 130 to 200. Its has good hermetic resistance, hence can be used for hermetic applications. SLV 73 has a low gel time which results in higher production due to shorter curing time. |
|
SLV 81
Solventless Varnish
Thermal Class 155R
|
It has good bond strength at elevated temperature and hence it is ideal for grinders and heavy duty machine tools and high speed machine. It has good hermetic resistance, hence can be used for hermetic applications. SLV 81 has a long pot life for dipping application, hence can be used for small motors for mixer, washing machine etc. |
|
|
|
|
Intec Polymers - Thinner
More Details Coming Soon !!!! |
|
|
|
|
 |
About Us
Request Information